HP SN6000 Manual de usuario descargar pdf (Pagina 102)

102 Managing Servers

To view details about the drives, logical disks, and volumes on a server:

1. In the navigation pane under Server-Storage View, select the server for which you want to view details.

2. Under [Logical Disk/Volume List], select a logical disk, and then click a drive letter.

The content pane provides the details for the selected drive; Figure 70 shows an example.

Figure 70 Drive, disk, and volume information

The data is organized into sections for general, disk, and volume information as follows:

• The top section, under the drive letter, provides the subsystem name, logical disk (LUN) name, server

name, and the adapter through which the volume is accessed.

• The Disk Information section provides details about the disk to which the volume belongs (a disk

may have multiple volumes), including:

•Disk name

• Status (for example, Online or Offline)

•Vendor name (HP)

• Capacity

• Health (for example, Healthy)

• Disk address that appears in the Windows Device Manager or the Drive Details dialog box (see

Figure 96 on page 124).

• The Volume Information section provides the following details for the volume:

• A pie chart shows the volume’s used and available space (similar to the Windows volume

details).

• Name indicates the volume name (not drive letter); this name is used by SAN Connection

Manager to open and close this volume.

• Attributes may include Active, Read-only, Boot, System, and so on.

• Status (for example, Online or Offline).

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 161 162

Sin comentarios

HP SN6000 Manual de usuario Pagina 102