HP DL380-SL Guía de usuario descargar pdf (Pagina 27)

Chapter 2: HP Clustered File System Commands 16

This command lists the current membership partitions according to the

membership file maintained on the server where you are running the utility.

Each server in the cluster has a membership partition file, which is called the

“local MP list.” Each SAN disk containing a membership partition also has its

own list of the membership partitions. Under normal operations, these lists

should all match.

The output from --get_current_mps contains a record for each membership

partition. Following is a sample record:

20:00:00:04:cf:13:33:12::0/1 OK 8001Kb active

The first field contains the disk UUID followed by a slash and the partition

number (partition 1 in the above example). The second field reports the status

of the membership partition. The third field specifies the size of the

membership partition, and the last field reports whether the membership

partition is active or inactive.

The status reported in the second field will be one of the following:

OK. The membership partition is included in the local membership partition

list. This is the normal status.

FENCED. The server has been fenced and cannot access the SAN. Start HP

Clustered File System if it is not running or reboot the server.

NOT_FOUND. The mprepair utility cannot find the device containing the

membership partition. There may be a problem with the disk or with another

SAN component. When the problem is repaired, the status should return to

OK.

INACCESSIBLE. The mprepair utility cannot access the device containing the

membership partition. There may be a problem with the disk or with another

SAN component. When the problem is repaired, the status should return to

OK.

CORRUPT. The partition is not valid. You will need to resilver the partition.

This step copies the membership data from a valid membership partition to

the corrupted partition.

NOTE: The membership partition may have become corrupt because it was

used by another application. Before resilvering, verify that it is okay to

overwrite any existing data on the partition.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 140 141

Sin comentarios

HP DL380-SL Guía de usuario Pagina 27