HP SN6000 Manual de usuario descargar pdf (Pagina 37)

HP SAN Connection Manager User Guide 37

10. A message box asks if you want to set the switch zoning. Choose one of the following options:

• To continue with the next step of switch setup, click Yes. The Set the Switch Default Zoning dialog

box (Figure 17) opens. Go to step 9.

• To set the switch zoning later, click No. (See “Setting the switch default zoning,” page 51.)

Figure 17 Set the Switch Default Zoning dialog box: new switch setup

The Set the Switch Default Zoning dialog box contains the following information:

• Default zone set name—Shows the default name for the current switch zoning configuration.

• Zone List—Shows the existing HBA zones with its HBA adapter and devices. If a zone list is closed

(the Switch Port #, Type, and Vendor information is hidden), click the plus mark (+) to open it.

• Switch Name (Port #)—Indicates the switch name and port number for each HBA and device.

• Type—Indicates the kind of device; for example, HBA or RAID storage.

• Vendor—Indicates the seller for the hardware indicated.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 161 162

Sin comentarios

HP SN6000 Manual de usuario Pagina 37