Hp Virtual Connect Enterprise Manager Software Manual de usuario descargar pdf (Pagina 59)

Table 22 Parameter descriptions for -set iscsi-boot-param (continued)

OptionalRequiredDescriptionParameter

NOTE: The

-targetport2 parameter

is required if the

-targetip2 parameter is

specified.

Specifies the TCP port

associated with the

alternative target IP address.

The default value is 3260.

-targetport2

xSpecifies the authentication

method. The initiator and

-authentication

target must agree on an

authentication method or the

iSCSI initiator cannot log on

to the target. Supported

authentication values include

none, chap, and chapm.

The default selection for this

attribute is none.

NOTE: The -username

parameter is required if the

authentication type is chap

or chapm.

Specifies the user name for

authentication. The

user-name length is a

maximum of 223 characters.

If the name string contains

non-alphanumeric

-username

characters, it should be

enclosed in quotation marks.

NOTE: The -secret

parameter is required if the

authentication type is chap

or chapm.

Specifies the secret

password for chap

authentication. It is specified

as a string or a long hex

value (starting with 0x). This

value must be at least 96

-secret

bits (12 bytes, 24

hexadecimal digits) and at

most 16 bytes, 32

hexadecimal digits long.

NOTE: The

-mutualusername

parameter is required if the

authentication type is

chapm.

Specifies the user name for

authentication. The

user-name length is a

maximum of 223 characters.

If the name string contains

non-alphanumeric

characters, it should be

enclosed in quotation marks.

-mutualusername

NOTE: The

-mutualsecret parameter

is required if the

authentication type is

chapm.

Specifies the password for

authentication. It should be

specified as a string or a

long hexadecimal value

(starting with 0x). This value

must be at least 96 bits (12

bytes, 24 hexadecimal

-mutualsecret

digits) and at most 16 bytes,

32 hexadecimal digits long.

xAllows the iSCSI option

ROM to retrieve the iSCSI

-iscsibootparamdhcp

boot parameters from DHCP

or through static

configuration. Valid values

are enabled and

disabled. The default

set iscsi-boot-param 59

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 112 113

Comentarios a estos manuales

Sin comentarios

Hp Virtual Connect Enterprise Manager Software Manual de usuario Pagina 59

Comentarios a estos manuales

Relacionado con productos y manuales para Software Hp Virtual Connect Enterprise Manager Software