Hp 6Gb SAS Switch for HP BladeSystem c-Class Manual de usuario descargar pdf (Pagina 66)

Success

NOTE: Entering a range of port numbers is not supported. Each port must be entered,

separated by a comma.

3. [Optional] Verify that the zone group was created as intended.

For example, use one of the following commands:

=> switch loc=local port all show detail

=> switch loc=local zg OpenZone show

The display of this example is abbreviated, retaining key details. The display shows information

for the switch installed in interconnect bay 5, and that port 4 is included in zone group named

Ports_1.

=> switch loc=local port all show detail

Blade Enclosure At BottomC7000

Switch: Local (VSM Active)

Blade Switch Port: 54(Ports_1)

Port Number: 1

Zoning Status: OK

Presence: Present

Attached Device Type: SAS Controller

Product ID: P2000 G3 SAS

Attached Device Firmware Version: T230

Enclosure Logical ID: 500C0FFDAC0A5000

LED Status: Green

Zone Group: Ports_1

Blade Switch Port: 55(Not Zoned)

Port Number: 2

Zoning Status: OK

Presence: Absent

LED Status: Off

66 Performing common tasks

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 84 85

Sin comentarios

Hp 6Gb SAS Switch for HP BladeSystem c-Class Manual de usuario Pagina 66