Hp PCIe U320 SCSI Host Bus Adapter Manual de usuario descargar pdf (Pagina 22)

5. Follow the directions in the installer to ﬁnish the installation.

Running the Dom

ain Validation utility

ToruntheATTOSCSIDomainValidationtool:

1. Launch the tool.

2. Select the ada

pter Channel of the SCSI bus, as shown in Figure 6.

Figure 6 Dom ain Validation U tilit y

3. Select the tests to be run.

4. In Fallback Scheme, select the negotiation parameters. The SDV test starts with the highest values

and if a problem is d etected, tests with the next lower set of values.

5. Select the target devices to be tested. The test is performed between the initiator and each target

device selected.

6. Press Start to start the test .

When the test is complete, a m essage panel displays. The panel shows the negotiated SCSI parameters

foreachdevice. Theleftsideofthescreenshowsthenegotiatedvalueafterthetestrunsandtheright

side shows the value before the test being run.

The Chang ed? column indicates whether the negotiated value changed as a result of the SCSI Domain

Validation tests. If the value did change, the connection between the initiator and the target device

may not have been optimized.

SCSI Domain Validation utility (Windows only)

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 60 61

Sin comentarios

Hp PCIe U320 SCSI Host Bus Adapter Manual de usuario Pagina 22