Hp Storage Mirroring Software Manual de usuario descargar pdf (Pagina 59)

5 - 13

b. To modify whether or not the replication set size will be calculated when the connection is established, use the set

command with the

CalculateOnConnect option. The CalculateOnConnect option is set to 1 for enabled or 0

for disabled. By default, the replication set size will be calculated.

Command SET

Description The Text Client/DTCL sends a request to Storage Mirroring to modify the value of a Storage

Mirroring program setting. The setting is immediately applied and is then forwarded to the registry

where it is also applied.

Syntax

SET <option>=<value> [machine]

Options ! option—See Storage Mirroring Text Client program settings on page 14-11.

! value—See Storage Mirroring Text Client program settings on page 14-11.

! machine—Name of the machine

Examples

! set netport=1100

! set VerifyLogName=”HA server.log”

! set DefaultAddress=”129.12.34.3”

Notes ! Some settings, although immediately applied to Storage Mirroring, will not take effect until the

client or service is restarted. For example, the Text Client must be closed and reopened for a

change to ClientLogName to take effect. And the service must be restarted to cause a change in

the modules loaded if the LoadSourceTarget setting is changed. See

Storage Mirroring Text Client

program settings

on page 14-11 for details on each configuration option.

! If you do not specify a machine name, the value from the current source will be updated. If you

have not identified an active source, no changes will be made.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 338 339

Sin comentarios

Hp Storage Mirroring Software Manual de usuario Pagina 59