Hp StoreEver TapeAssure Software Manual de usuario descargar pdf (Pagina 105)

Figure 44 Multiple tests for each tape speed

The error rate tests for each direction cover different parts of the tape and are run at different

speeds, as shown in (page 105). This allows the test to characterize the drive for each direction,

testing each set of heads.

Figure 45 Multiple tests run in each direction

The pass/fail criteria are the same as for the support ticket — the drive must be able to write high

quality data using no more than 20% additional tape to do so. Note that a drive will still work

well even if it needs 50% additional tape but the figure of 20% is used to allow for a little wear

and still leave a great deal of margin.

The output, if the Everything detail level is selected, shows the characterization of the drive,

first by tape speed and then by direction.

||_ 1.8 m/sec. tape speed:Effective capacity:94.8% Margin: 98.6% (3.0/3.0 GB written using 170.4 meters of

tape)

||_ Channel variation: 0.0% Channel variation margin: 100.0%

||_ Offtrack count: 0 CCQ rewrite percent: 0.1%

||_ 2.1 m/sec. tape speed:Effective capacity:94.8% Margin: 98.4% (3.0/3.0 GB written using 170.5 meters of

tape)

||_ Channel variation: 0.0% Channel variation margin: 100.0%

||_ Offtrack count: 0 CCQ rewrite percent: 0.1%

||_ 2.4 m/sec. tape speed:Effective capacity:94.7% Margin: 98.1% (3.0/3.0 GB written using 170.6 meters of

tape)

||_ Channel variation: 0.0% Channel variation margin: 100.0%

...

||_ 3.5 m/sec. tape speed:Effective capacity:94.7% Margin: 98.4% (3.0/3.0 GB written using 128.0 meters of

Diagnostic tests 105

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 212 213

Sin comentarios

Hp StoreEver TapeAssure Software Manual de usuario Pagina 105