Hp XP External Storage Software Manual de usuario descargar pdf (Pagina 24)

Figure 5 Example of Alternate Path Setting

Figure 6 on page 24 illustrates an example of setting an alternate path when a switch is used. In

Figure 6 on page 24, two ports are speciﬁed in the local storage system, and connected to the ports in

the external storage system through the switch. In this case, two ports of different clusters are speciﬁed in

the local storage system. Therefore, the setting of the alternate path is enabled.

Figure 6 Example of Available Alternate Path Setting

In Figure 7 on page 25, two paths are also set between the internal volume and the external volume.

However, one port is speciﬁed in the local storage system, and two ports are speciﬁed in the external

storage systems over the switch. This conﬁguration is not recommended because two ports of different

clusters need to be set in the local storage system for alternate path settings in External Storage.

About External Storage Operations

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 137 138

Sin comentarios

Hp XP External Storage Software Manual de usuario Pagina 24