HP DreamColor Z31x Studio Display Manual de usuario Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 111
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
Component Function
14 USB 3.0 downstream ports Connect optional USB devices to the display.
15 USB 3.0 downstream ports
(side panel)
Connect optional USB devices to the display.
Setting up the display
Use caution when setting up the display
CAUTION: To prevent damage to the display, do not touch the surface of the LCD panel. Pressure on the
panel may cause nonuniformity of color or disorientation of the liquid crystals. If this occurs the screen will
not recover to its normal condition.
To prevent damage to the display, be careful not to put pressure on the colorimeter area (top center of bezel)
when transporting the display.
Installing the display stand
CAUTION: Do not touch the surface of the LCD panel. Pressure on the panel may cause non-uniformity of
color or disorientation of the liquid crystals. If this occurs the screen will not recover to its normal condition.
The display oers easy mounting and unmounting of the display panel. To mount the panel onto the stand:
1. Lay the display panel facedown on a at surface covered by a clean, dry cloth.
2. Slide the top of the stand (1) under the upper lip of the recess in the back of the panel.
3. Lower the bottom of the stand's mounting plate (2) into the recess until it snaps into place.
Setting up the display 5
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 110 111

Comentarios a estos manuales

Sin comentarios