HP EliteBook Folio 1040 G2 Notebook PC Bundle Manual de usuario Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 91
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
When used with mobile network operator service, HP Mobile Broadband gives you the freedom to stay
connected to the Internet, send email, or connect to your corporate network whether you are on the road or
outside the range of Wi-Fi hotspots.
HP supports the following technologies:
HSPA (High Speed Packet Access), which provides access to networks based on the Global System for
Mobile Communications (GSM) telecommunications standard.
EV-DO (Evolution Data Optimized), which provides access to networks based on the code division
multiple access (CDMA) telecommunications standard.
You may need the HP Mobile Broadband Module serial number to activate mobile broadband service. The
serial number is printed on a label on the bottom of your computer.
Some mobile network operators require the use of a SIM. A SIM contains basic information about you, such as
a personal identication number (PIN), as well as network information. Some computers include a SIM that is
preinstalled in the SIM slot. If the SIM is not preinstalled, it may be provided in the HP Mobile Broadband
information provided with your computer or the mobile network operator may provide it separately from the
computer.
For information about inserting and removing the SIM, see the Inserting and removing a SIM (select models
only) on page 17 section in this chapter.
For information about HP Mobile Broadband and how to activate service with a preferred mobile network
operator, see the HP Mobile Broadband information included with your computer. For additional information,
see the HP website at http://www.hp.com/go/mobilebroadband (select regions/countries only).
Inserting and removing a SIM (select models only)
CAUTION: To prevent damage to the connectors, use minimal force when inserting a SIM.
To insert a SIM, follow these steps:
1. Shut down the computer.
2. Close the display.
3. Disconnect all external devices connected to the computer.
4. Unplug the power cord from the AC outlet.
5. Remove the SIM slot plug (select models only).
NOTE: The SIM slot plug is removable on models that include HP Mobile Broadband.
NOTE: Your computer is equipped with either a non-removable SIM slot plug or a removable SIM slot
plug. The non-removable SIM slot plug cannot be pushed inside or serviced. To remove the removable
SIM slot plug, press in on the SIM slot plug to release it, and then remove it from the slot.
Connecting to a wireless network 17
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 90 91

Comentarios a estos manuales

Sin comentarios