HP EliteDesk 800 G2 Small Form Factor PC Manual de usuario descargar pdf (Pagina 43)

10. Connect the power cable (1) and data cable (2) to the back of the hard drive.

NOTE: If the 2.5-inch hard drive is the primary drive, connect the other end of the data cable to the

dark blue SATA connector on the system board labeled SATA0 . If it is a secondary hard drive, connect

the other end of the data cable to one of the light blue SATA connectors on the system board.

11. Rotate the drive cage back down to its normal position.

CAUTION: Be careful not to pinch any cables or wires when rotating the drive cage down.

12. Replace the computer access panel.

13. If the computer was on a stand, replace the stand.

14. Reconnect the power cord and any external devices, and then turn on the computer.

15. Lock any security devices that were disengaged when the access panel was removed.

Installing and removing drives 37

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 57 58

Sin comentarios

HP EliteDesk 800 G2 Small Form Factor PC Manual de usuario Pagina 43