HP OMEN 27 Display Manual de usuario

User Guide

Setting up the monitorUse caution when setting up the monitorIMPORTANT: To prevent damage to the monitor, do not touch the surface of the LCD panel. P

Connecting the cablesNOTE: The monitor ships with select cables.1. Place the monitor in a convenient, well-ventilated location near the computer or so

3. Connect the Type-B connector on the USB upstream cable to the USB upstream port on the rear of the monitor. Then connect the cable’s Type-A connect

5. Route the cables through the cable management clip on the rear of the monitor.Connecting USB devicesThe rear of the monitor provides one USB Type-B

Adjusting the monitor for comfortTilt the display head forward or backward to set it to a comfortable eye level.Adjust the display head up or down to

Turning on the monitor1. Press the power button on the source device to turn it on.2. Press the power button on the rear of the monitor to turn it on.

Installing a security cableYou can secure the monitor to a xed object with an optional security cable available from HP.Storing headphonesThe monitor

Using the ambient lightThe monitor features an ambient light to illuminate a desk top or wall and enhance the gaming experience. You can adjust the li

Mounting the display headThe display head can be attached to a wall, swing arm, or other mounting xture.NOTE: This apparatus is intended to be suppor

Attaching the VESA mounting bracketA VESA mounting bracket is included with the monitor for use when attaching the display head to a wall, swing arm,

© Copyright 2017 HP Development Company, L.P.HDMI, the HDMI Logo and High-Denition Multimedia Interface are trademarks or registered trademarks of HD

2 Using the monitorSoftware and utilitiesThe NVIDIA control panel software must be downloaded and installed from http://www.geforce.com/drivers. In or

Installing the INF and ICM lesAfter you determine that you need to update, use one of the following methods to install the les.Installing from the o

Main menu DescriptionMenu Control Adjusts the on-screen display (OSD) controls.Management Returns all OSD menu settings to the factory default setting

Selecting the Low Blue Light modeDecreasing the blue light emitted by the display reduces the blue light exposure to your eyes. HP monitors provide se

3 Support and troubleshootingSolving common problemsThe following table lists possible problems, the possible cause of each problem, and the recommend

Contacting supportTo resolve a hardware or software problem, go to http://www.hp.com/support. Use this site to get more information about your product

4 Maintaining the monitorMaintenance guidelinesTo enhance the performance and extend the life of the monitor:●Do not open the monitor cabinet or attem

A Technical specicationsNOTE: All specications represent the typical specications provided by HP's component manufacturers; actual performance

Specication Measurement specications represent the typical specications provided by HP’s component manufacturers; actual performance may vary eith

Entering user modesThe video controller signal may occasionally call for a mode that is not preset if:●You are not using a standard graphics adapter.●

About This GuideThis guide provides information on monitor features, setting up the monitor, using the software and technical specications.WARNING! I

B AccessibilityHP designs, produces, and markets products and services that can be used by everyone, including people with disabilities, either on a s

iv About This Guide

Table of contents1 Getting started ...

Contacting support ...

1 Getting startedImportant safety informationAn AC power adapter and cord may be included with the monitor. If another cord is used, use only a power

Product features and componentsFeaturesThe monitor features include the following:●68.47 cm (27-inch) diagonal viewable area with 2560 × 1440 QHD reso

NOTE: For safety and regulatory information, refer to the Product Notices provided in your documentation kit. To locate updates to the user guide for