HP Pavilion 27q Display Manual de usuario descargar pdf (Pagina 14)

Mounting the monitor

The monitor head can be attached to a wall, swing arm, or other mounting xture.

NOTE: This apparatus is intended to be supported by a UL or CSA Listed wall mount bracket.

CAUTION: This monitor supports the VESA industry-standard 100 mm mounting holes. To attach a third-

party mounting solution to the monitor, four 4 mm, 0.7 pitch, 10 mm–long screws are required. Longer

screws may damage the monitor. It is important to verify that the manufacturer’s mounting solution is

compliant with the VESA standard and is rated to support the weight of the monitor head. For best

performance, it is important to use the power and video cables provided with the monitor.

Removing the monitor stand

You can remove the monitor head from the stand to install it on a wall, a swing arm, or other mounting

xture.

CAUTION: Before beginning to disassemble the monitor, be sure the monitor is turned o and all cables are

disconnected.

1. Disconnect and remove all cables from the monitor.

2. Position the monitor facedown on a at surface covered by a protective sheet foam or nonabrasive

cloth.

3. Press the release latch (1) and lift the stand up and o of the monitor (2).

8 Chapter 1 Getting Started

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Sin comentarios

HP Pavilion 27q Display Manual de usuario Pagina 14