HP Pro Slate 8 Tablet Manual de usuario descargar pdf (Pagina 32)

Docking charger

Description Spare part number

Docking charger 808818-001

Before removing the docking charger, follow these steps:

1. Turn o the tablet. If you are unsure whether the tablet is o, turn the tablet on, and then shut it down

through the operating system.

2. Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.

3. Disconnect all external devices from the tablet.

4. Remove the back cover (see Back cover on page 14).

5. Remove the battery (see Battery on page 15).

6. Remove the rear-facing webcamera (see Rear-facing webcamera on page 16).

7. Remove the front-facing webcamera (see Front-facing webcamera on page 17).

8. Remove the top speaker (see Top speaker on page 19).

9. Remove the antenna board (see Antenna board on page 21).

10. Remove the LCM bracket (see LCM bracket on page 22).

11. Remove the audio jack (see Audio jack on page 24).

Remove the docking charger:

1. Release the ZIF connector (1) that secures the docking charger to the system board.

26 Chapter 6 Removal and replacement procedures

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 48 49

Sin comentarios

HP Pro Slate 8 Tablet Manual de usuario Pagina 32