HP SmartCard NIPRNet Solution for US Government Manual de usuario Pagina 10

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 42
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 9
Verify the network settings
Use the following information to verify the HP printer’s TCP/IP network information.
1. Open the EWS.
For instructions, see Access the Embedded Web Server (EWS) on page 4
2. On the top navigation tabs, select the Networking tab.
3. On the left navigation pane, select the TCP/IP Settings, and then select the Network Identication tab.
Figure 3-2 TCP/IP Settings
4. Verify that the Host Name and Domain Name (IPv4/IPv6) are properly set.
5. Verify that the DNS Primary and DNS Secondary are correctly set.
6. If required, type additional DNS suxes in the DNS Suxes text box of the TCP/IP Domain Sux
section.
7. If applicable, type the WINS Primary and Secondary addresses in the WINS (IPv4 only) section.
8. Click Apply to save the changes.
6 Chapter 3 Congure the printer settings using the Embedded Web Server ENWW
Vista de pagina 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 41 42

Comentarios a estos manuales

Sin comentarios