HP 2700W Manual de instalación descargar pdf (Pagina 16)

Reset to factory defaults

After you have configured the HP Jetdirect 2700w Print Server, the settings are saved in memory.

If you lose communication with the HP Jetdirect 2700w Print Server, or if it fails to operate properly,

you might need to reset the print server to its factory-default configuration. This is called a cold reset.

NOTE: Resetting the HP Jetdirect 2700w Print Server to factory-default settings will cause the print

server to lose its wireless connection to your network. Reconfiguration of wireless network settings and

reinstallation of the print server will be required.

Parameters on the HP Jetdirect 2700w Print Server can be reset to factory default values using the

following procedures.

HP LaserJet printer/MFP reset

In most cases, the HP Jetdirect 2700w Print Server is reset to factory defaults when factory settings are

reset on the printer/MFP.

CAUTION: Be sure to print an HP Jetdirect configuration page before performing a reset. Resetting

the printer clears all data from the printer memory and resets all printer settings, including network

configurations, to their factory default values. After a reset, users will be affected due to changes in

user-specified printer settings. Network systems will lose their connection to the printer.

After a reset, print an HP Jetdirect configuration page to confirm that factory-default values were

assigned. You must now re-configure the HP Jetdirect 2700w Print Server. See

Configure the print

server using the HP Embedded Web Server on page 6.

Service menu example

To perform a reset on many recent HP LaserJet printers and MFPs:

1. At the control panel, press the Home button.

2. Press the down arrow and highlight the Administration menu, then press the OK button.

3. Press the down arrow and highlight the General Settings menu, then press the OK button.

4. Press the down arrow and highlight the Restore Factory Settings option, then press the OK

button to reset the product to the original factory settings.

8 Chapter 3 Troubleshooting ENWW

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 42 43

Sin comentarios

HP 2700W Manual de instalación Pagina 16