HP ProCurve 5400zl Manual de usuario descargar pdf (Pagina 37)

2-13

Installing the Series 5400zl Switches

Installation Procedures

Installing the Series 5400zl

Switches

Caution The switch power supplies are hot swappable; they can be installed while the

switch is receiving power from the supply in the other slot. But, as indicated

by the caution statement on the power supply, the supply must not be

connected to AC power before being installed or removed.

For safety and proper switch cooling, if either of the power supply slots are

not being used, make sure to attach the cover plate over the slot. Please see

the “Installation Precautions” on page 2-6 for more information.

For installation details, see the instructions in the manual that comes with the

power supply.

Figure 2-3. Installing a Power Supply

CAUTION:

Disconnect AC power from the power supply BEFORE installing or

removing the supply. Otherwise, damage to the equipment may result.

Refer to the installation guide for proper power cord selection

Insert the power supply into the

opening, then slide it all the way in

until it connects to the switch. The

power supply face plate will be

flush with the back face of the

switch.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 117 118

Sin comentarios

HP ProCurve 5400zl Manual de usuario Pagina 37