Hp UPS Network Module Manual de usuario descargar pdf (Pagina 43)

HP UPS Network Module web interface 43

To add a trap receiver:

1. Click Add Trap Receiver.

2. Configure the settings for the new application on the Trap Receivers Settings screen (on page 44).

To modify a trap receiver:

1. Select the checkbox for the application you want to modify. To select all applications, click All.

2. Click Modify Trap Receiver.

3. Modify the settings for the application on the Trap Receivers Settings screen (on page 44).

To remove a trap receiver:

1. Select the checkbox for the application you want to remove. To select all applications, click All.

2. Click Remove.

To simulate a utility power failure:

1. Select the checkbox for the application you want to test. To select all applications, click All.

2. Click Utility Failure Test. The UPS Network Module sends a Utility failure trap, and then sends a Utility

restored trap 30 seconds later.

3. Verify that the selected application received the traps over the network.

To simulate a UPS On Battery condition:

1. Select the checkbox for the application you want to test. To select all applications, click All.

2. Click Shutdown Test.

3. The selected application processes the simultaneous alarms and performs an actual shutdown

sequence.

CAUTION: The Shutdown Test generates an actual shutdown sequence for the server on which

the application is running.

4. Verify that the server protection is working correctly.

Click Help to view online help.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 86 87

Sin comentarios

Hp UPS Network Module Manual de usuario Pagina 43