Hp Netserver E Server series Manual de usuario Pagina 15
- Pagina / 106
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
9
2 Opening and Closing the HP
NetServer
Introduction
This chapter describes how to remove and replace the HP NetServer’s main cover
and adjust the stabilizing feet on the bottom of the chassis.
WARNING Before removing the cover, always disconnect the power cord
and unplug telephone cables. Disconnect the power cord to
avoid exposure to high energy levels that may cause burns
when parts are short-circuited by metal objects such as tools
or jewelry. Disconnect telephone cables to avoid exposure to
shock hazard from telephone ringing voltages.
Tools Required
The following tools may be required to remove and replace the cover.
• Torx T-15 driver
• ¼-inch flat blade screwdriver
Removing the Cover
To remove the cover, follow these steps:
NOTE These steps do not include the removal of the front bezel of the
NetServer. You do not need to remove the front bezel of the
HP NetServer E 800 to install internal accessories, such as
memory or mass storage.
1. Turn off the NetServer and disconnect the power cord and any phone line.
2. Unlock the cover by using the key in the key bag located on the rear of the
NetServer.
The locking mechanism is at the rear. See Figure 2-1.
3. Remove six (6) T-15/slotted thumbscrews. See Figure 2-1.
- HP NetServer E 800 1
- User Guide 1
- Audience Assumptions 2
- Contents 3
- HP NetServer Navigator CD-ROM 4
- HP NetServer Navigator 4
- Rear View 10
- Link LED 11
- LAN Speed Indicator 11
- Powering-Up the NetServer 12
- Powering-Down the NetServer 12
- Sleep States (ACPI) 13
- NetServer 15
- 2 Opening and Closing the HP 15
- Replacing the Cover 17
- Adjusting the NetServer Feet 18
- Introduction 19
- • SCSI Device Selection 20
- Boot Priority 21
- Installing Hard Disk Drives 23
- Connector 29
- Terminator 29
- Connectors (2) 29
- External 32
- Connection 32
- Installing Additional DIMMs 34
- Latch Opening 35
- Air Duct 35
- System Board 38
- IRQ Settings 42
- Installing Accessory Boards 44
- Figure 5-1. Accessory Slots 45
- Slot Cover 46
- PCI Board’s Plastic Extension 48
- Figure 6-1. System Board 50
- Installing a Second Processor 51
- Firmware and Software Changes 57
- Mouse, and UPS 59
- Document 63
- Number 63
- Viewing the Readme File 64
- HP Management Solutions 65
- Setup (BIOS) Utility 67
- Menu Bar 68
- Using the Setup Screens 69
- ➢Hardware Security 71
- Remote Console Feature 74
- • Update the NetServer BIOS 75
- • Run HP NetServer DiagTools 75
- SCSI Configuration Utility 76
- Overview 79
- 10 Troubleshooting 81
- Common Installation Problems 82
- NetServer Will Not Power On 83
- Error Messages 84
- Chapter 10 Troubleshooting 85
- POST Error Messages 86
- Resetting Lost Passwords 88
- Hardware Problems 90
- CD-ROM Drive Does Not Work 91
- SCSI Device Does Not Work 91
- Replacing a Battery 92
- A Specifications 95
- Appendix A Specifications 96
- System Board Layout 98
Relacionado con productos y manuales para Hardware De La Computadora Hp Netserver E Server series
Hardware De La Computadora Hp Server Management Packs for Microsoft System Cente Manual de usuario
(86 paginas)
(86 paginas)
Hardware De La Computadora Hp Планшетный ПК HP EliteBook Revolve 810 G1 Manual de usuario
(113 paginas)
(113 paginas)
Hardware De La Computadora Hp Guía de usuario de HP Smart Update Manager Manual de usuario
(88 paginas)
(88 paginas)
Hardware De La Computadora Hp Software de acelerador HP XML para SAP NetWeaver P Manual de usuario
(118 paginas)
(118 paginas)
Hardware De La Computadora Hp Blade de servidor HP ProLiant BL685c G5 Manual de usuario
(110 paginas)
(110 paginas)
Ironman Fitness 350r manuals
Owner’s manuals and user’s guides for Fitness, gymnastics & weight training Ironman Fitness 350r.
We providing 1 pdf manuals Ironman Fitness 350r for download free by document types: User Manual
Comentarios a estos manuales