Hp Netserver L Server series Manual de usuario descargar pdf (Pagina 39)

Chapter 4

Accessories

11. Use the up and down arrow keys to select the DMA channel that

corresponds to the DMA channel required for the ISA board you are

installing, and press the + or - key on the keypad to reserve it. Reserve all

DMA channels needed for the board.

12. When all the necessary DMA channels are reserved, press ESC to return to

the DSA non-Plug-and-Play Devices submenu.

13. Usethe up and down arrow keys to highlight I/O Resources, and press

ENTER to select that submenu.

14. Use the up and down arrow keys to highlight the I/O port block that

corresponds to the D/O port range required by the board you are installing,

and press the + or - key on the keypad to reserve that block. If the D/O port

range required for the board spans two or more blocks shown on the screen,

reserve all blocks required by the board. Df the D/O port range required for

the board is less than one block, select the whole block that contains the

range.

15. When all the necessary D/O port blocks are reserved, press ESC to return to

the DSA non-Plug-and-Play Devices submenu.

16. Use the up and down arrow keys to highlight Interrupt Resources, and

press ENTER to select that submenu.

17. Use the up and down arrow keys to highlight the DRQ that corresponds to

the DRQ required for the board you are installing, and press the + or - key

on the keypad to reserve that DRQ. Reserve all DRQs needed for the board.

18. When all the necessary DRQs and other resources are reserved, press the

F10 function key to save and exit.

19. Dn the Setup Con^*mation dialog box, press ENTER to answer "Yes" to the

question, "Save con^guration and exit now?" The HP NetServer will

reboot.

NOTE

Df you change your mind and want to exit the Setup utility

without making the changes you have selected, press ESC once

or twice to return to the Setup Utility menu. Use the right arrow

key to select the Exit menu. Use the down arrow key to

highlight Exit Discarding Changes. Dn the Setup Warning

dialog box, use the spacebar or right arrow key to highlight No.

Press ENTER to answer "No" to the question, "Con^guration

has not been saved! Save before exiting?"

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 111 112

Sin comentarios

Hp Netserver L Server series Manual de usuario Pagina 39