Hp NonStop G-Series Manual de usuario descargar pdf (Pagina 113)

5157/5157 ACL S-Series DLT Subsystems Installation Users Guide

Operating the 5157 ACL Tape Drive 6-24

6.13 Display Error Logs

To display the error history of the module, make sure to use the

Show History menu. Access it as follows:

1. At the Default Screen, press the Enter button to enter the

Menu Mode. The Main Menu is displayed.

2. At the Main Menu, press the ü button five times until the

÷ in the display is next to ‘Show History Menu.’

3. Press the Enter button to select the submenu.

4. At the Show History Submenu, press the ü button once so

that the ÷ in the display is next to ‘Error History.’

5. Press the Enter button to select the function. A circular list

of 4-line error reports is displayed in the format shown in

Figure 6-20.

6. Using the ü and ù buttons, scroll the list to display the

error history of the module.

Fault Code: XXXX Fault Code: XXXX éé

Error DescriptionError Description

DD/MMM/YYY HH:MM:SSDD/MMM/YYY HH:MM:SS

Entry Entry NNNN Of NNNNNNNN Of NNNNêê

Figure 6-20 Error History Screen

6.14 Inserting and Removing Cartridges

The tape magazine must be removed from the module in order to

insert or remove cartridges. When inserting cartridges, be sure that

the slot intended for use is not already reserved in the system map

for a cartridge in a drive. The best way to avoid conflicts is to

unload the drive, either through the host computer software or by

using the Load/Unload command on the Main Menu, described

later in Section 6.22.

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 180 181

Sin comentarios

Hp NonStop G-Series Manual de usuario Pagina 113