Hp ProLiant BL460c Gen8 Server Blade Manual de usuario descargar pdf (Pagina 9)

Component identification 9

Position Default Function

Off Reserved

Off Off = Power-on password is enabled.

On = Power-on password is disabled.

Off Off = No function

On = ROM reads system configuration

as invalid.

— Reserved

S10

— Reserved

S11

— Reserved

S12

— Reserved

To access redundant ROM, set S1, S5, and S6 to on.

When the system maintenance switch position 6 is set to the On position, the system is prepared to erase all

system configuration settings from both CMOS and NVRAM.

CAUTION: Clearing CMOS and/or NVRAM deletes configuration information. Be sure to

properly configure the server or data loss could occur.

Mezzanine connector definitions

Item PCIe

Mezzanine connector 1

x16, Type A mezzanine card only

Mezzanine connector 2*

x16, Type A or B mezzanine card

*When installing a mezzanine option on mezzanine connector 2, processor 2 must be installed.

DIMM slot locations

DIMM slots are numbered sequentially (1 through 8) for each processor. When high performance heatsinks

are installed, DIMM slots 4 and 5 must remain empty and only 6 DIMMs are available for each processor.

The supported AMP modes use the alpha assignments for population order, and the slot numbers designate

the DIMM slot ID for spare replacement.

The arrow points to the front of the server blade.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 82 83

Sin comentarios

Hp ProLiant BL460c Gen8 Server Blade Manual de usuario Pagina 9