Hp ProLiant DL140 G3 Server Manual de usuario descargar pdf (Pagina 48)

Network operating system (NOS) installation 48

Installing Sun Solaris 10

Perform the procedures in this section to install Sun Solaris 10 to your ProLiant server

Pre-installation instructions

1. Complete the pre-NOS installation procedures listed on page 31.

2. Have the following installation requirements on hand:

• HP ProLiant DL140 Generation 3 Server Support CD

• Sun Solaris 10 Update 1 DVD

NOTE: You must first install a DVD-compatible optical media drive in your ProLiant server before

installing Sun Solaris 10.

• A Windows PC that has a:

• Floppy drive

• Optical media drive

• Browser that supports HTML

• Two or more clients for testing purpose (optional)

Installation flow

1. Install Sun Solaris 10.

Refer to the next section for detailed instructions.

2. Install additional HP accessories.

The HP ProLiant DL140 Generation 3 Server Support CD includes the drivers for accessories compatible

with your server.

Refer to the product manual enclosed with the accessory for the detailed installation procedure and/or to

the attached readme.txt file associated with the driver. The readme.txt file can be found on the

appropriate driver diskette.

Sun Solaris 10 installation

Section 1. Launching the Sun Solaris 10 installer

1. Turn on the server and insert the Sun Solaris 10 Update 1 (SS10U1) DVD.

2. Reboot the system to the SS10U1 DVD.

3. Click Solaris, then press Enter.

4. Type 1 to select the Solaris Interactive Installation

option.

After a few minutes, the Proposed Window System Configuration for Installation

list appears. These settings

are incorrect and should be modified.

5. Press Esc to modify the settings and customize the installation.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 54 55

Sin comentarios

Hp ProLiant DL140 G3 Server Manual de usuario Pagina 48