Hp ProLiant DL160 Gen8 Server Manual de usuario Pagina 30
- Pagina / 109
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Setup 30
• Remote deployment installation—To remotely deploy an operating system, use Insight Control server
deployment for an automated solution.
For additional system software and firmware updates, download the HP Service Pack for ProLiant from the HP
website (http://www.hp.com/go/spp/download). Software and firmware must be updated before using
the server for the first time, unless any installed software or components require an older version. For more
information, see "Keeping the system current (on page 84)."
The Smart Update Firmware DVD ISO is also available at the download tab on the HP website
(http://www.hp.com/go/foundation).
For more information on using these installation methods, see the HP website (http://www.hp.com/go/ilo).
Powering on and selecting boot options
1. Connect the Ethernet cable.
2. Press the Power On/Standby button.
3. During the initial boot:
o To modify the server configuration ROM default settings, press F9 when prompted from the start up
sequence to enter the RBSU. By default, RBSU runs in the English language.
o If you do not need to modify the server configuration and are ready to install the system software,
press F10 to access Intelligent Provisioning.
NOTE: If an HP Smart Array controller has been added or is embedded in the system, the
controller defaults to a RAID configuration based on the size and number of hard drives installed.
For more information on modifying the controller default settings, see the documentation on the
Documentation CD.
For more information on automatic configuration, see the HP ROM-Based Setup Utility User Guide on the
Documentation CD or the iLO Management Engine Information Library
(http://www.hp.com/go/ilomgmtengine/docs).
Registering the server
To register the server, see the HP Registration website (http://register.hp.com).
- User Guide 1
- Contents 3
- Contents 4 4
- Contents 5 5
- Component identification 6
- Front panel LEDs and buttons 7
- Rear panel components 8
- System board components 9
- DIMM slots 10
- System maintenance switch 10
- Drive numbering 11
- Drive LED definitions 12
- FBWC module LED definitions 12
- Fan modules 14
- Component identification 15 15
- Operations 16
- Operations 18 18
- Remove the access panel 19
- Install the access panel 19
- Remove the PCI riser cage 21
- Install the PCI riser cage 22
- Operations 23 23
- Rack planning resources 24
- Optimum environment 24
- Temperature requirements 25
- Server warnings and cautions 26
- Rack warnings 27
- Installing hardware options 28
- Registering the server 30
- Introduction 31
- Security bezel option 31
- Drive options 31
- Installing a hot-plug drive 32
- Mini-SAS cable option 34
- VGA power cable option 36
- Controller options 38
- 8. Do one of the following: 40
- Optical drive option 42
- SFF configuration 43
- Memory options 45
- HP SmartMemory 47
- DIMM identification 47
- Memory protection modes 48
- Memory population guidelines 49
- Installing a DIMM 51
- Expansion board options 61
- FlexibleLOM option 63
- Cabling 67
- SFF drive cabling 69
- Power cabling 70
- Cable number Description 71
- Maximum configuration 71
- FBWC capacitor pack cabling 72
- Front panel cabling 72
- Internal USB cabling 73
- Server mode 74
- HP product QuickSpecs 74
- HP iLO Management Engine 74
- Active Health System 75
- Intelligent Provisioning 76
- HP Insight Diagnostics 77
- Erase Utility 77
- HP Service Pack for ProLiant 78
- HP ROM-Based Setup Utility 79
- Using RBSU 80
- Auto-configuration process 80
- Boot options 81
- Configuring AMP modes 81
- Utilities and features 82
- ROMPaq utility 83
- Automatic Server Recovery 83
- USB support 83
- Keeping the system current 84
- Software and firmware 85
- Version control 85
- ProLiant servers 85
- Troubleshooting 86
- System battery replacement 87
- Regulatory information 89
- Electrostatic discharge 90
- Specifications 91
- Specification Value 92
- Power supply calculations 94
- Support and other resources 95
- Customer Self Repair 97
- Reparo feito pelo cliente 99
- Acronyms and abbreviations 103
- Documentation feedback 106
- Index 107 107
- Index 108 108
- Index 109 109
Relacionado con productos y manuales para Hardware De La Computadora Hp ProLiant DL160 Gen8 Server
(57 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.096 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales