Hp ProLiant DL320 G3 Server Manual de usuario descargar pdf (Pagina 40)

40 HP ProLiant DL320 Generation 3 Server User Guide

Removing a hard drive blank

CAUTION: To prevent improper cooling and thermal damage,

do not operate the server unless all bays are populated with either a

component or a blank.

Hard drive guidelines

When adding hard drives to the server or drive enclosure, observe the following

general guidelines:

• If only one hard drive is used, install it in the bay with the lowest number.

• Drives must be the same capacity to provide the greatest storage space

efficiency when drives are grouped together into the same drive array.

IMPORTANT: When SATA hard drives are installed, SATA LED

functionality and SATA hot-plug capability are not supported currently.

Installing a SATA hard drive

1. Power down the server ("Powering down the server" on page 19).

2. Remove the existing hard drive blank or hard drive from the drive bay.

3. Install the hard drive.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 118 119

Sin comentarios

Hp ProLiant DL320 G3 Server Manual de usuario Pagina 40