Hp ProLiant DL320 G3 Server Manual de usuario descargar pdf (Pagina 41)

Hardware options installation 41

NOTE: Depending on the model purchased, the server or hard drive

may look slightly different than the illustration.

4. Resume normal server operations.

Installing non-hot-plug hard drives

CAUTION: To prevent improper cooling and thermal damage,

do not operate the server unless all bays are populated with either a

component or a blank.

1. Access the internal server components ("Preparation procedures" on page

2. Remove the SATA backplane ("Removing the hot-plug SATA backplane" on

page 24

), if previously installed.

3. Set the SCSI ID for the non-hot-plug SCSI hard drive. Refer to the

documentation that ships with the hard drive.

4. Remove the four screws pre-installed on the tray.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 118 119

Sin comentarios

Hp ProLiant DL320 G3 Server Manual de usuario Pagina 41