Hp ProLiant WS460c Gen8 Graphics Server Blade Manual de usuario descargar pdf (Pagina 31)

Operations 31

Torque both front plate screws to 3.0~3.5 in-lbf.

IMPORTANT: Ensure that air flow impedance control labels cover the three openings on each

end of the I/O plate. These labels control the air flow into the GRID card and balance the air flow

to adjacent blades. Using the card in the expansion blade without implementing this measure

might potentially result in unexpected host shutdown of the host blade and/or nearby blades in

the same enclosure. These labels are replaceable with any commonly available tape or label, as

long as the tape or label covers the hole as shown and has construction to withstand the air flow

without deforming or falling off when powered off. After installation, always ensure that the labels

are not removed or detached.

8. Install the workstation blade into the enclosure.

9. Power up the workstation blade.

10. Download and install the latest drivers from the HP website (http://www.hp.com) or NVIDIA website

(http://www.nvidia.com/content/drivers/drivers.asp).

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 97 98

Sin comentarios

Hp ProLiant WS460c Gen8 Graphics Server Blade Manual de usuario Pagina 31