Hp Server tc3100 series Manual de usuario descargar pdf (Pagina 116)

Appendix I Installing the Visual Diagnostic Panel

Installing the Diagnostic Panel in the tc4100 HP

Server

Installing the Diagnostic Panel

1. Power down the HP Server.

2. Disconnect the power cord(s).

WARNING The power supplies continue to provide standby voltage to the

HP Server until the power cord(s) is/are disconnected.

3. Remove the cover.

4. Snap the Diagnostic Panel into place, as shown in Figure I-3.

NOTE Wear a wrist strap and use a static-dissipating work surface

connected to the chassis when handling components. Ensure

that the metal of the wrist strap contacts your skin.

Connecting the Cable

The tc4100 HP Server is shipped from the factory with a short cable that is

connected on one end to the front panel. The other end is free, waiting to be

connected to the Visual Diagnostic Panel after it is snapped into place, as shown

in the figure.

110

1 2 ... 111 112 113 114 115 116 117 118 119 120 121

Sin comentarios

Hp Server tc3100 series Manual de usuario Pagina 116