Hp DL385 Manual de usuario descargar pdf (Pagina 13)

Server component identification 13

System maintenance switch

Position Default Function

S1 Off Off = iLO security is enabled.

On = iLO security is disabled.

S2 Off

Off = System configuration can be

changed.

On = System configuration is locked.

S3 Off Reserved

S4 Off Reserved

S5 Off Off = No function

On = Clears power-on password and

administrator password

S6 Off Off = No function

On = Clear NVRAM.

S7 Off Reserved

S8 Off Reserved

When the system maintenance switch position 6 is set to the On position, the system is prepared to erase

all system configuration settings from both CMOS and NVRAM.

CAUTION: Clearing CMOS and/or NVRAM deletes configuration information. Be sure to properly

configure the server or data loss could occur.

NMI jumper

The NMI jumper allows administrators to perform a memory dump before performing a hard reset. Crash

dump analysis is an essential part of eliminating reliability problems, such as hangs or crashes in OSs,

device drivers, and applications. Many crashes can freeze a system, requiring you to do a hard reset.

Resetting the system erases any information that would support root cause analysis.

Systems running Microsoft® Windows® experience a blue-screen trap when the OS crashes. When this

happens, Microsoft® recommends that system administrators perform an NMI event by temporarily

shorting the NMI header with a jumper. The NMI event enables a hung system to become responsive

again.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 123 124

Sin comentarios

Hp DL385 Manual de usuario Pagina 13