Hp DS20L Manual de usuario descargar pdf (Pagina 49)

Operation 3-5

3.2.1.1 auto_action

The SRM auto_action environment variable determines the default

action the system takes when the system is power cycled, reset, or

experiences a failure.

Systems can boot automatically (if set to autoboot) from the default boot device

under the following conditions:

• When you first turn on system power

• When you power cycle or reset the system

• When system power comes on after a power failure

• After a panic

The factory setting for auto_action is halt. The halt setting causes the system

to stop in the SRM console. You must then boot the operating system manually.

For maximum system availability, auto_action can be set to boot or restart.

• With the boot setting, the operating system boots automatically after the

SRM init command is issued.

• With the restart setting, the operating system boots automatically after the

SRM init command is issued, and it also reboots after an operating system

crash.

Example

To set the default action to boot, enter the following SRM commands:

P00>>> set auto_action boot

P00>>> init

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 151 152

Sin comentarios

Hp DS20L Manual de usuario Pagina 49