Hp Z400 Workstation Manual de usuario descargar pdf (Pagina 58)

Installing the airflow guide (Z400 only)

1. Follow the procedures described in Preparing for component installation on page 43 to prepare

the workstation for component installation.

2. Press the power cables, including P1, down toward the system board between the DIMM slots

and the internal bay, as shown in the following figure.

Figure 7-3 Positioning the chassis cables

3. Set the airflow guide into the chassis.

a. Place the edge of the airflow guide (1) between DIMM socket #6 and the CPU heatsink.

Figure 7-4 Installing the airflow guide

b. Route the power and data cables through the opening next to the internal bay (2).

50 Chapter 7 Installing memory ENWW

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 75 76

Sin comentarios

Hp Z400 Workstation Manual de usuario Pagina 58