HP J7949E Manual de usuario descargar pdf (Pagina 47)

ENWW TCP/IP Configuration 47

TCP/IP Main

host-name:

(sys-name:, name:)

Specifies the node name that will appear on the Jetdirect configuration page.

Default is NPIxxxxxx, where xxxxxx is the last six digits of the LAN hardware

address.

parm-file:

Specifies the path and file name whose contents are sent to the printer for printing

each time the print server is powered on. The path and filename entry is limited to

64 alphanumeric characters.

domain-name:

The domain name for the device (for example, support.hp.com). It does not

include the host name; it is not the Fully Qualified Domain Name (such as

printer1.support.hp.com).

pri-dns-svr:

(dns-srv)

The IP address of the primary DNS (Domain Name System) server.

sec-dns-svr:

The IP address of a secondary DNS server to use if the primary DNS server is

unavailable.

pri-wins-svr:

(pri-wins-srv:)

The IP address of the primary Windows Internet Name Service (WINS) server.

sec-wins-svr:

(sec-wins-srv:)

The IP address of the secondary Windows Internet Name Service (WINS) server.

TCP/IP Print Options

9100-printing:

(9100-config:)

Enables or disables printing to TCP port 9100 on the print server. 0 disables,

1 (default) enables.

ftp-printing:

(ftp-config:, ftp:)

Enables or disables the ability to print through FTP: 0 disables, 1 (default) enables.

ipp-printing:

(ipp-config:, ipp:)

Enables or disables the ability to print through IPP: 0 disables, 1 (default) enables.

Table 3.3 TFTP Configuration File Parameters (2 of 10)

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 231 232

Sin comentarios

HP J7949E Manual de usuario Pagina 47