HP Compaq dc5700 Guía de usuario descargar pdf (Pagina 18)

Installing Additional Memory

The computer comes with double data rate 2 synchronous dynamic random access memory (DDR2-

SDRAM) dual inline memory modules (DIMMs).

DIMMs

The memory sockets on the system board can be populated with up to four industry-standard DIMMs.

These memory sockets are populated with at least one preinstalled DIMM. To achieve the maximum

memory support, you can populate the system board with up to 4 GB of memory configured in a high-

performing dual channel mode.

DDR2-SDRAM DIMMs

For proper system operation, the DDR2-SDRAM DIMMs must be:

●

industry-standard 240-pin

●

unbuffered PC2-5300 667 MHz-compliant

●

1.8 volt DDR2-SDRAM DIMMs

The DDR2-SDRAM DIMMs must also:

●

support CAS latency 4 and 5 for DDR2/667 MHz

●

contain the mandatory JEDEC SPD information

In addition, the computer supports:

●

256Mbit, 512Mbit, and 1Gbit non-ECC memory technologies

●

single-sided and double-sided DIMMs

●

DIMMs constructed with x8 and x16 DDR devices; DIMMs constructed with x4 SDRAM are not

supported

NOTE The system will not start if you install unsupported DIMMs.

12 Chapter 2 Hardware Upgrades ENWW

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 51 52

Sin comentarios

HP Compaq dc5700 Guía de usuario Pagina 18