HP Compaq dc5700 Guía de usuario descargar pdf (Pagina 23)

CAUTION Regardless of the power-on state, voltage is always present on the system

board as long as the system is plugged into an active AC outlet. You must disconnect the

power cord to avoid damage to the internal components of the computer.

5. Remove the computer access panel.

6. Locate the correct vacant expansion socket on the system board and the corresponding expansion

slot on the back of the computer chassis.

7. On the rear of the computer, a sliding slot cover lock secures the expansion card brackets and

expansion slot covers in place. Loosen the captive thumbscrew that holds the slot cover lock in

place (1) and slide the slot cover lock up and off the chassis (2).

Figure 2-8 Releasing the Slot Cover Lock

8. Before installing an expansion card, remove the expansion slot cover or the existing expansion

card.

ENWW Removing or Installing an Expansion Card 17

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 51 52

Sin comentarios

HP Compaq dc5700 Guía de usuario Pagina 23