HP 210-1060EV Información técnica Pagina 70

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 105
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 69
2. Disconnect the power connector cable (2) from the system board.
3. Remove the Phillips PM2.0×4.0 screw (1) that secures the system board to the base enclosure.
4. Lift the right side of the system board (2) until it rests at an angle.
5. Remove the system board (3) by sliding it up and away from the base enclosure.
Reverse the procedure to install the system board.
62 Chapter 4 Removal and replacement procedures
Vista de pagina 69
1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 104 105

Comentarios a estos manuales

Sin comentarios