HP EliteBook 8740W Especificaciones Pagina 78

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 168
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 77
4. Slide the graphics board heat sink (4) up and forward at an angle and remove it.
NOTE: The thermal material must be thoroughly cleaned from the surfaces of the graphics
board heat sink and the graphics board each time the graphics board heat sink is removed.
Thermal paste is used on the largest component (1) on the graphics board and the graphics
board heat sink section (2) that services it. Thermal pads and/or thermal paste are used on the
other graphics board components (3) and the graphics board heat sink sections (4) that service
them.
NOTE: Location of the thermal pads and thermal paste may vary.
Reverse this procedure to install the graphics board heat sink.
70 Chapter 4 Removal and replacement procedures
Vista de pagina 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 167 168

Comentarios a estos manuales

Sin comentarios