HP OmniBook 7100 Manual de usuario descargar pdf (Pagina 26)

HP OmniBook 7100 Removal and Replacement 2-5

Removing the Hard Disk Drive

(User-Replaceable)

Table 2-5. Hard Disk Drive Replacement Part Numbers

Description Part Number Exchange

Part Number

Drive, hard disk (6.4GB, IBM) 0950-2829 F1440-69100

Drive, hard disk (8.1GB, IBM) 0950-2830 F1449-69100

Required Equipment

• Small Phillips screwdriver.

Removal Procedure

1. Unplug the ac adapter, if present, and remove the battery.

2. Turn the unit bottom side up.

3. Use a key or flat-blade screwdriver to pop up the hard drive handle.

4. Slide the hard drive toward the front, then lift it out.

Figure 2-3. Removing the Hard Disk Drive

5. If you are installing a new hard drive that does not have a plastic case, you can remove the case

parts from the old hard drive:

• Unsnap the two plastic snaps next to the connector and remove the plastic tray.

• Remove the four screws from the sides of the shield.

• Remove the hard drive from the shield.

• Unplug the connector from the hard drive.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 86 87

Sin comentarios

HP OmniBook 7100 Manual de usuario Pagina 26