HP OmniBook 7100 Manual de usuario descargar pdf (Pagina 32)

HP OmniBook 7100 Removal and Replacement 2-11

Removing the Display Assembly

(HP Authorized Service Providers Only)

Required Equipment

• Small Phillips screwdriver.

Removal Procedure

1. Unplug the ac adapter, if present, and remove the battery.

2. Remove these additional assemblies:

• Keyboard (page 2-8).

• Heatsink and right hinge cover (page 2-9).

3. Open the display fully.

4. Remove the left hinge cover by pressing in and lifting the front edge.

Hint

In the next step, unplug the connector before removing the grounding screw. Otherwise, you may

unseat the LVDS PCA.

5. Unplug the display cable from the LVDS PCA, then remove the screw holding the grounding

strap.

6. Remove the four screws from the hinges and lift off the display assembly.

Figure 2-7. Removing the Display Assembly

Screw, M2.5×6mm

Screw, M2.5×4mm

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 86 87

Sin comentarios

HP OmniBook 7100 Manual de usuario Pagina 32