HP OmniBook 800CS/CT Manual de usuario descargar pdf (Pagina 80)

5. Lastly, remove the keyboard flex cables from the zero insertion force slots. If available, use

the provided Keyboard Flex Cable Removal Tool (part number 5182-7482) to assist in

“opening” the zero insertion force slots. Otherwise, a pick may be used to gently lift up the

top of the slots. See Figure 30.

CAUTION:

To avoid damage to the solder joints, do not open the zero force insertion

connectors by prying against the case of the OmniBook.

Replacement Procedure

1. To replace, reverse the Removal Procedure. Once reconnected, the keyboard flex cables

must be tucked properly into the frame. See Figure 31.

CAUTION:

To ensure a proper connection, be sure to place the keyboard flex cables

securely into the zero insertion force connectors.

To avoid damage to the keyboard flex cables, do not allow them to fold

under the keyboard.

Figure 30 - Keyboard Flex Cables

Figure 31 - Keyboard Flex Cable Placement

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 118 119

Sin comentarios

HP OmniBook 800CS/CT Manual de usuario Pagina 80