HP omnibook XE2 Manual de usuario Pagina 25

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 85
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 24
HP OmniBook XE2 Removal and Replacement 2-5
3. Release the two latches at the sides of the RAM module by pushing them gently outward, away
from the sides of the module. The free edge of the module pops up.
4. Pull the module out of the connector. Handle it only by the edges.
Figure 2-3. Releasing the RAM Module Latches
Reassembly Notes
Insert the RAM board into the connector at about a 30° angle until it is fully inserted. Then press
down at both sides until both latches snap closed.
Vista de pagina 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 84 85

Comentarios a estos manuales

Sin comentarios