HP omnibook XE2 Manual de usuario Pagina 35

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 85
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 34
HP OmniBook XE2 Removal and Replacement 2-15
Removing the Top Case
(HP Authorized Service Providers Only)
Required Equipment
Small Phillips screwdriver.
Pointed knife or probe.
Small flat-blade screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
2. Remove these additional assemblies:
Hard disk drive (page 2-6).
Fan (page 2-7).
Keyboard (page 2-9).
Display assembly (page 2-11).
3. Using the Phillips screwdriver, remove four screws on the top case: two on either side of the fan
location, one toward the top right, and one (recessed) next to the touch pad
Figure 2-9. Removing the Top Case
Cables
Cable connectors
Vista de pagina 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 84 85

Comentarios a estos manuales

Sin comentarios