HP Pavilion xu Notebook PC series Guía de usuario Pagina 115

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 181
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 114
Troubleshooting and Maintenance
Troubleshooting Your Computer
Reference Guide 115
If a port on the expansion base isn’t working
Make sure the computer is fully inserted into the expansion base.
Reset the expansion base—see “To reset the computer” on page 31.
If the operating system hangs when you dock or undock
Your system may hang if docked or undocked while suspending or resuming. Make
sure the computer has completely suspended or resumed before you dock or undock.
If the computer does not respond to the undock switch or Eject command
Make sure the expansion base has power: plug in the AC adapter or plug in a
secondary battery.
Restart the computer: click Start, Shut Down (or Turn Off Computer), Restart.
Use the emergency undock latch—see “To undock the computer” on page 80.
If a floppy drive connected to the parallel port doesn’t work
Make sure there is only one floppy drive in the system.
Use only the HP F2008A parallel floppy cable.
For Windows 98, you must notify BayManager before you connect or disconnect the
parallel floppy drive.
If the computer pauses for a long time after docking
For Windows 98, if you have a LAN port on your computer but never use it, disable
the LAN port in Device Manager.
Hard disk drive problems
If the computer’s hard drive doesn’t spin
Make sure the computer has power. If necessary, connect the AC adapter, and make
sure it is fully plugged into a power source and into the rear of the computer.
Remove and reinsert the hard drive—see “To replace the hard disk drive” on
page 105.
If the hard disk makes a buzzing or whining noise
Back up the drive immediately.
See whether the noise is coming from elsewhere, such as the fan or a PC Card drive.
Vista de pagina 114
1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 180 181

Comentarios a estos manuales

Sin comentarios