HP LX800 Manual de instalación descargar pdf (Pagina 14)

2. You can also use skates to maneuver the crate around tight corners or to move the crate laterally.

Move the printer over ramps

WARNING! Do not exceed the maximum incline if you must move the printer up or down a ramp.

Failure to respect the maximum incline could damage the printer.

CAUTION: Slopes steeper than 5% may cause serious damage to the printer.

Once the crate packaging has been removed from the printer, the maximum incline of a ramp used to

move the printer is 5%.

If you must move the printer over a ramp that exceeds the maximum incline (5%), do not remove the

printer from the pallet. The pallet will help prevent damage to the printer.

Remove the crate packaging

Manpower Tools Time

2 persons M17 socket wrench, Phillips screwdriver,

pliers, ladder

40 minutes

NOTE: Approximately 16 bolts and 100 Phillips screws secure the crate.

In some cases, it may be necessary to leave the printer inside the crate packaging to go up ramps or

make second story deliveries. Plan accordingly.

1. Beginning with the top, left corners, remove the Phillips screws securing the top panels and remove

them.

10 Chapter 3 Receive the shipment ENWW

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 85 86

Sin comentarios

HP LX800 Manual de instalación Pagina 14