HP Compaq Pro 6300 Series Small Form Factor Guía de usuario descargar pdf (Pagina 40)

Removing a Hard Drive from a Drive Bay

NOTE: Before you remove the old hard drive, be sure to back up the data from the old hard drive so

that you can transfer the data to the new hard drive.

1. Remove/disengage any security devices that prohibit opening the computer.

2. Remove all removable media, such as compact discs or USB flash drives, from the computer.

3. Turn off the computer properly through the operating system, then turn off any external devices.

4. Disconnect the power cord from the power outlet and disconnect any external devices.

CAUTION: Regardless of the power-on state, voltage is always present on the system board

as long as the system is plugged into an active AC outlet. You must disconnect the power cord

to avoid damage to the internal components of the computer.

5. Remove the computer access panel.

6. Disconnect the power cable (1) and data cable (2) from the back of the hard drive.

Figure 2-24 Disconnecting the Hard Drive Cables

32 Chapter 2 Microtower (MT) Hardware Upgrades

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 103 104

Sin comentarios

HP Compaq Pro 6300 Series Small Form Factor Guía de usuario Pagina 40