HP M575c Guía de usuario descargar pdf (Pagina 116)

Print on both sides automatically

The duplexing unit in the HP LaserJet Enterprise 500 color MFP M575 or HP LaserJet Enterprise color

flow MFP M575 product prints on two sides of a sheet of paper when the Print on Both Sides

option is specified in the print job.

This product supports smart duplexing. The smart duplexing feature increases printing performance by

preventing one-page print jobs or single-sided pages of a duplexed print job from going through the

duplexing unit even when the duplexing feature has been selected in the driver.

All paper types support the smart duplexing feature, except for paper types that cannot be printed on

both sides (such as labels, transparencies, and envelopes) and the following paper types:

●

Prepunched

●

Preprinted

●

Letterhead

●

Cardstock

When the paper type is set to Unspecified, the smart duplexing feature is disabled.

To achieve the best print quality when printing on the second side of the page, the product needs to

make adjustments to its print modes. When you select a paper type, you are, in effect, instructing the

product to use a group of settings (such as fuser temperature and print speed) to print the paper with

the best possible quality. This group of settings is known as print mode. A different print mode is used

with each paper type. Print-mode adjustments for the second side of a duplexed page are automatic.

Flip Pages Up

Use the Flip Pages Up check box to specify the duplex-binding option. By default, the Flip Pages

Up check box is not available. It is available only when Print on Both Sides is selected. The

following table demonstrates the results of selecting this check box, depending on the paper orientation

selected on the Finishing tab.

Table 3-2 Page orientation

Orientation (Finishing tab) Flip Pages Up selected Flip Pages Up not selected

Portrait Short-edge binding Long-edge binding

Landscape Long-edge binding Short-edge binding

When Print on Both Sides is selected, the document preview image changes to show a spiral

binding along either the left edge or the top edge of the page. In addition, a folded-over corner

appears in the lower-right portion of the preview image, indicating that printing occurs on the back

side. An arrow on the folded-over corner points in the direction that the pages would be flipped if they

were bound together.

Short-side binding is for print jobs with pages that read by flipping over like the pages of a calendar.

Long-side binding is for print jobs with pages that read by turning like the pages of a book.

98 Chapter 3 HP PCL 5, PCL 6, and PS emulation drivers for Windows® ENWW

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 195 196

Sin comentarios

HP M575c Guía de usuario Pagina 116