HP 10BASE-T Guía de usuario Pagina 21

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 67
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 20
In the following illustration, the first hub is connected to two end nodes and
to a second hub.
ThinLAN Connections
With an HP ThinLAN Transceiver Module for 10Base-2 networks, you can
connect your hub to a thinLAN network. The following illustration shows a
hub with an HP ThinLAN Transceiver Module connected to a ThinLAN
backbone.
Up to 100 meters
PC attached to Port 1:
switch in MDI-X position
and straight-through
cable is used.
Hub attached to Port 1:
switch in MDI position and
straight-through cable is used.
HP J2608A ThinLAN
Transceiver Module installed
in the AUI/Xcvr Slot
thin coax cable
50-ohm terminator
Installing the Hub
Installing the Hub
1-11
Vista de pagina 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 66 67

Comentarios a estos manuales

Sin comentarios