HP 10BASE-T Guía de usuario Pagina 39

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 67
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 38
Port status LEDs
The following table provides LED port status information. If an
AdvanceStack 8U/16U SNMP module is installed, additional LED states may
be observed. For information about the hub LEDs when a module is
installed, see the manual accompanying the module.
LED State Meaning of LED
AUI/Xcvr
Port (green)
On An optional HP Transceiver Module is properly installed in the
hub’s back panel slot.
Off An HP Transceiver Module is not installed.
Slow
Flash*
The HP Transceiver Module port has auto-partitioned. See
“Auto-Partitioning” later in this chapter.
Twisted-pair
Port (green)
On Link beat is detected from the attached node.
Off The port is not receiving the link beat signal from the attached
node.
Slow
Flash*
The port has been auto-partitioned. See “Auto-Partitioning
later in this chapter.
* The slow flash is approximately once every 1.5 seconds.
Hub Reference
Hub Reference
3-3
Vista de pagina 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 66 67

Comentarios a estos manuales

Sin comentarios