HP AA-RSB6B-TE Manual de usuario Pagina 51
- Pagina / 104
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Installing the SAN Switch 2/8
51hp StorageWorks SAN Switch 2/8 Installation Guide
Important Information on Setting the CORE PID Format
After connecting the SAN Switch 2/8 via Ethernet, you must verify that all
switches you intend to connect to the SAN use the same Core Port Identifier (PID)
format. A PID is one of two addressing mechanisms used in Fibre Channel. The
PID is analogous to specifying the physical switch and port a device is attached to
in data networks. It is not analogous to an IP address. PIDs are assigned by a Fibre
Channel switch when a device logs into the fabric.
An example PID might look like this:
011F00
In new installations, where both edge and Core switches reside, you must verify
that the edge switch (for example, SAN Switch 2/8) PID format matches the Core
switch’s PID format, before connecting to the SAN.
For example, switches with firmware V3.0.2f or later have the PID set to 1. For a
SAN to work correctly, all HP StorageWorks SAN switches or HP Surestore FC
switches must have the same PID format setting, either 0 or 1. If a switch is
introduced to an existing SAN with a setting that differs from the setting on the
SAN, the switch will segment.
How to Check the Current Core PID Setting
To determine a switch’s current Core PID format, connect directly to a switch in
your SAN and complete the following steps via a telnet session, or the serial cable
supplied with the switch.
Note: All switches in the SAN require the same PID format setting.
1. Type configShow and press Enter.
2. About 15 lines down (press Enter to display more information on the page),
locate the following line:
fabric.ops.mode.pidFormat:
3. Type switchDisable and press Enter.
4. Type configure and press Enter.
5. Type y at the Fabric parameters prompt, (yes, y, no, n): [no] y.
- SAN switch 2/8 1
- Part Number: AA-RSB6B-TE 2
- Contents 3
- Overview 10
- Conventions 11
- Equipment Symbols 12
- About this Guide 13
- Rack Stability 14
- Getting Help 15
- HP Authorized Reseller 16
- SAN Switch 2/8 Features 18
- SFP Media Side 19
- Optical Ports 20
- Fan Side 20
- Optional Hardware Kits 21
- Installing the 23
- SAN Switch 2/8 23
- Check the License Installed 24
- Four Switch Limitation Errors 24
- Violation Timer Errors 26
- Installing the SAN Switch 2/8 27
- Figure 5: Carton contents 28
- Cooling Requirements 30
- Power Requirements 31
- Comparable EIA Rack 33
- SHR-2501 34
- Optional HP System/e Rack 36
- Figure 11 41
- Figure 13 43
- SHR-2563A 45
- Power On Self-Test 46
- Checking POST Results 46
- Requirements 47
- ® environment, type: 49
- Modifying Domain IDs 53
- User Guide 55
- Verifying Operation 56
- Cascading Switches 58
- Managing the 59
- Interpreting LED Activity 60
- Managing the SAN Switch 2/8 61
- Rear Panel LED 64
- Management Overview 65
- Enabling Licensed Features 66
- Checking the Firmware Version 69
- Interpreting POST Results 70
- Diagnostic Tests 71
- RSHD.EXE 74
- ■ The version Telnet command 76
- Regulatory Compliance 77
- EMC Statement (Canada) 78
- Germany Noise Declaration 78
- VCCI EMC Statement (Japan) 78
- Harmonics Conformance (Japan) 79
- BSMI EMC Statement (Taiwan) 79
- RRL EMC Statement (Korea) 79
- Laser Safety 80
- Battery Replacement Notice 81
- Regulatory Compliance Notices 82
- Electrostatic Discharge 83
- Grounding Methods 84
- Technical Specifications 85
- Dimensions 86
- Power Supply Specifications 86
- Environmental Requirements 87
- Memory Specifications 87
- Serial Port Specifications 88
- Buffer-to-buffer Flow Control 90
- Glossary 100
Relacionado con productos y manuales para Los conmutadores de red HP AA-RSB6B-TE
Los conmutadores de red HP 445942-001 Manual de usuario
(199 paginas)
(199 paginas)
Los conmutadores de red HP AA-RS2JA-TE Manual de usuario
(360 paginas)
(360 paginas)
Los conmutadores de red HP P4459A Manual de usuario
(72 paginas)
(72 paginas)
Los conmutadores de red HP CN1000E Manual de usuario
(29 paginas)
(29 paginas)
Los conmutadores de red HP GBE2 Manual de usuario
(176 paginas)
(176 paginas)
Los conmutadores de red HP J3177A Manual de usuario
(62 paginas)
(62 paginas)
Los conmutadores de red HP 445946-001 Manual de usuario
(198 paginas)
(198 paginas)
Los conmutadores de red HP BladeSystem C-Class Interconnect Component Manual de usuario
(26 paginas)
(26 paginas)
Los conmutadores de red HP 2600-PWR Manual de usuario
(306 paginas)
(306 paginas)
Los conmutadores de red HP 2000fc Manual de usuario
(26 paginas)
(26 paginas)
Philips 017266693 manuals
Owner’s manuals and user’s guides for Outdoor lighting Philips 017266693.
We providing 1 pdf manuals Philips 017266693 for download free by document types: Datasheet
Comentarios a estos manuales