HP 100VG Guía de usuario Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 116
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
Mounting the Hub on a Wall
Important A hub should be mounted only to a wall or wood surface that is at
least 1/2-inch plywood or its equivalent.
1. Using a Phillips (cross-head) screwdriver, attach the mounting brackets
to the hub in one of the positions shown in the illustrations below. Use
the 10-mm M4 screws included in the accessory kit.
2. Attach the hub to the wall or wood surface with 5/8-inch number 12
wood screws (not included).
10-mm M4 screws
Bracket mounting position for flat
mounting on a wall.
Bracket mounting position for
bookshelf-style mounting on a wall.
Plug the power cord into the hub’s
power receptacle before mounting the
hub. There may not be enough room to
do so after the hub is mounted.
10-mm M4 screws
Installing the
HP AdvanceStack Hub
Installing the HP AdvanceStack Hub
1-13
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 115 116

Comentarios a estos manuales

Sin comentarios